Help

Home - Help
▲ how to choose diamond tools

    For the user, the first step is to know cutting machine kind, as power HP, Rotary RPM, Max Cutting Depth and cutting material,
and Judge Cutting with water or without water.

The information will help clients to choose a correct saw blade for this material.

Normally water can cool and removal clips.

Water is good for speed and life of blade, dry saw blade issued where water is not available or desired. It runs on high RPM machine to get air-flow cooling.
Main types of cutting machines
Electric angle grinder/ Hand-hold
Table Saw/Portable masonry saw, Bench Saw Electric and petrol High Speed Saw/Hand-hold
Joint Cutter/Floor Saw/Walking Machine
Wall tracking saw
Bridge Cutting Machine

Safety First !

Before mounting the saw blade ensure that the machine cannot start (pull out main plug)
Rotational direction arrow of the saw blade has to match the spindle rotational direction
Not suitable for grinding – grinding can lead to serious injury through segment break outs
Saw specification has to be appropriate for the material to be cut
Do not tilt the saw blade in the cut
Do not carry out any curved cuts
Allow cooling down breaks, if saw blade is sparking heavily (use reciprocating cut)
Use protective clothing

Huada is not responsible for any accident due to wrong operation!

Please use the following when operate the cutting:

When place order for saw blades please inform the following:
 
  Diameter (Inch or mm)
  Inner Hole Size (Inch or mm)
  Installation hole (If, need drawing)
  Saw Blades No.(How many pcs blades per Machine)
  Saw Blank Type (Made in which country, What's the thickness?)
  Segment No. (how many pcs segment per blade)
  Segment Size (L x W x H, if possible please inform Steel Core Thickness)
  Use of saw blade (For Granite, or other material)
  Quantity NO. (How many pcs, or how many sets segments)
  Machine Power, RPM
  Feed Speed (M/Minute)
  Expected Cutting Depth (How many mm per time, forward or backward)
  Expected Cutting Life (How many SQM)
  Coolant System (Water or Oil, how many liters/Minute, etc.)
  Expected Shipping Date
  Special Requirements (If)
 
  If only order segments please inform the following:
 
  Diameter (Inch or mm)
  Segment No. (how many pcs segment per blade)
  Segment Size (L x W x H, if better to inform the Steel Core Thickness)
  Use of saw blade (For Granite, or other material)
  Saw Blades No. of the machine (How many saw blades per machine)
  Quantity NO. (how many sets segments)
  Machine Powder, RPM
  Feed Speed (M/Minute)
  Expected Cutting Depth (How many mm per time, forward or backward)
  Expected Cutting Life (How many SQM)
  Expected Shipping Date
  Special Requirements (If)

分享按钮